Firmware for TUSB926x that support U1/U2

igor ben

Other Parts Discussed in Thread: TUSB9261

Hi all,

I am looking for firmware for TI TUSB9261 thats supports U states(U1\U2). I looked at product page and could find it. Could you provide a link for latests FW that does support PM?

Thanks

over 10 years ago

0 Elias Villegas M. over 10 years ago

TI__Guru* 76130 points

Hello,
You can configure the firmware to support remote wake from U states.
Use the flash burner utility available here www.ti.com/.../sllc414

Regards

0 igor ben over 10 years ago in reply to Elias Villegas M.

Prodigy 20 points

supporting remote wake is not the same as support U states. I know that there is FW rev 0.99 that's supports U states(U1/U2 enabled) for this TI device but I can't find it anywhere. could you upload it to the forum please.

Interface

Interface forum

Firmware for TUSB926x that support U1/U2