DS90UB926 - supply current of PCLK=33.23MHz

Hello,

I'm looking forward to the reply.
I found that the DS90UB914A-Q1 has some supply current specifications for some PCLK conditions.
Are there similar data for DS90UB926-Q1?

Best Regards,
Ryuji Asaka

Asaka-san.

DS90UB914A supply current specs are specified for each operation mode. That is not only PCLK frequency difference.

Which supply current data do you need at 33.23Mhz? May I ask why you need this?

Best Regards,

Sugiura

Sugiura san,

Thank you for the reply.
I will check the condition to the customer.
Should we check the setting of configuration select (table 9) ?

The customer would like to know supply current for estimating power supply.

Best Regardsm
Ryuji Asaka

Asaka-san,

Does your customer assume 3.3V or 1.8V VDDIO?

Best Regards,
Sugiura

Sugiura san,

I'm checking the customer VDDIO voltage.

Best Regards,
Ryuji Asaka

Hello Sugiura san,

Please see the customer conditions.

VDDIO=3.3V
LFMODE=L
Repeater=L
BackwardCompatible=L
I2S Channel B＝H

I'm looking forward to the suppply current.

Best Regards,
Ryuji Asaka