TUSB3410 USB I2C Header Generator Utility

AHMED ROUETBI

Prodigy 20 points

Other Parts Discussed in Thread: TUSB3410

Hi,

i can't find the TUSB3410 USB I2C Header Generator Utility please can you provide me with a link.

Thanks

over 10 years ago

0 Roberto Diaz over 10 years ago

TI__Genius 11255 points

Hello Ahmed,

The I2C Header Generator is no more recommended to be used instead of this one please use the TUSB3x10 EEPROM Burner tool (http://www.ti.com/lit/zip/sllc443)

Regards,

Roberto.

0 Kshitij Gupta over 9 years ago in reply to Roberto Diaz

Intellectual 420 points

Hi Roberto,

I am writing firmware for TUSB3410. Using SDCC I've generated .ihx file then using GCC I created a bin file. To load the firmware to EEPROM I am using EEPROM burner utility.

The Descriptor defined in firmware is different from descriptor given on EEPROM burner utility. How can I modify the descriptor for EEPROM Header using EEPROM Burner. Only VID, PID, Manufacturer and Product name can be changed using EEPROM burner utility.

Kindly help me for same.

Thanks and Regards

Kshitij Gupta

Interface

Interface forum

TUSB3410 USB I2C Header Generator Utility