TPD13S523 MHL Support

yoshiki hasebe

Mastermind 6385 points

Other Parts Discussed in Thread: TPD13S523

Dear Sirs,

My customer asked me whether the supporting of the MHL of TPD13S523 possible.

His question is "common mode Impedance" of MHL Standard.

This specification is 30Ω.

Is it safe to connect this device (TPD13S523)?

Bset　Regards,

Y.Hasebe

over 9 years ago

0 Guy Yater over 9 years ago

TI__Genius 12190 points

The device is designed to connect to a system that has 100 ohms differential, or 25 ohms common mode impedance. The TPD13S523 IO pins add about 1 pF of capacitance to these lines. It will always lower the impedance in the area of the IO pins.

Can you tell me what data rate needs to be supported?

0 yoshiki hasebe over 9 years ago in reply to Guy Yater

Mastermind 6385 points

Hello Guy-san,

Thank you for your quick reply.
I understand your comment.
I will answer it to my customer.
Also I will ask your question to him.

Best Regards,
Y.Hasebe

Interface

Interface forum

TPD13S523 MHL Support