About TPS65982 1.7.0 GUI FW can't work at TPS65982 EVM.

Lung Chun Lee

Intellectual 420 points

Other Parts Discussed in Thread: TPS65982

Dear Sir:

I used TPS65982 1.7.0 GUI to config FW code.

And upload FW code in the SPI Flash of TPS65982 module or TPS65982 EVM.

But TPS65982 have no function.

I used old version of TPS65982 0.9.0 GUI that can let TPS65982 module or EVM worked normally.

Please give me the advise.

Thank you.

Lucas

over 9 years ago

0 Karl Fleischmann over 9 years ago

TI__Expert 3625 points

Hello Lucas,

Can you please provide a little more information regarding your system set-up and what you were trying to configure in 1.7.0? When you say that the TPS65982 has no function, do you mean it does not power up or is it more along the lines of it is not performing some function as expected? Can you run an I2C Read Registers script so we can see what the system states is going on?

Additionally, can you please attach the file you used to flash the TPS65982?

Regards,
Karl