Are there any PHY chip for TI DSP Hyperlink or SRIO?

Peter010

Other Parts Discussed in Thread: DS125BR111, DS125BR820, DS100BR111, DS100KR800

Hello

Hyperlink and SRIO are used in Keystone I & II. I want to know are there any PHY chip can help me to boost signal power for long distance transmission?

Thanks

Xining Yu

over 10 years ago

0 Michael Lu (Santa Clara) over 10 years ago

TI__Mastermind 29655 points

Hi Xining,

I am not as familiar with Hyperlink, but I have been able to find that SRIO is similar to 10G-KR protocol, for which we have various repeater solutions that can boost signal to extend the link. I presume you are using SRIO 3.0 at 10.3125 Gbps? How much loss in dB are you expecting during signal transmission?

If so, you may start off by taking a look at a couple redriver options: DS100BR111 or DS125BR111 for 1-lane bidirectional, and DS100KR800 or DS125BR820 for 8-channel unidirectional.

Thanks,

Michael

0 Peter010 over 10 years ago in reply to Michael Lu (Santa Clara)

Genius 4165 points

Thanks for your replying.

0 Peter010 over 10 years ago in reply to Michael Lu (Santa Clara)

Genius 4165 points

Another question. Hyperlink is the internal CBA 3.x-based transaction, which is LVCMOS-based. Do you the chips you mentioned above suit for the need?

Thanks
Xining

0 Lee Sledjeski over 10 years ago in reply to Peter010

TI__Mastermind 43795 points

Hi Xining,

There is more information about Hyperlink in E2E on this link. The repeaters Michael called out are compatible with XAUI - be sure to AC couple them when interfacing to a Hyperlink IO.

Regards,

Lee

Interface

Interface forum

Are there any PHY chip for TI DSP Hyperlink or SRIO?