• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 788 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB1210 ULPI I/F

vinod Naik
Intellectual 400 points
Other Parts Discussed in Thread: TUSB1210

Dear Sir/Madam,

I have to use TUSB1210 in my PCB design. I need two USB2.0(host/device/bridge mode between host and device) I/F connected to FPGA(Kintex7). DO i need to write code/driver/file system to act as host or device or bridge mode.

Please help me to understand

Tahnks

vinod

  • 0
    TI__Genius 11280 points

    Hello Vinod,

    I would require more details about your application in order to answer your question.

    If your two ports only need to be host, you can use a TUSB1210 + TUSB2046 (usb hub 2.0)

    But if you need a couple of ports that must be both host or device (On-the-go) you will need a couple of TUSB1210, with all the software/drivers/file system needed.

    Regards,

    Gerardo