USB HUBs and HSIC

Hello Team,

I had a question come up regarding USB HSIC standard and our USB solutions. The following products were some of the IC's that fit the specification I was looking for, however, I am not sure if these USB2.0 HUBs are compatible with this HSIC standard.

I was not able to find anything on the data sheet and I myself am not too familiar with HSIC. Any guidance or information would be greatly appreciated!

Thanks, and have a great weekend!

Javier Palomo

over 9 years ago

0 Elias Villegas M. over 9 years ago

TI__Guru* 76130 points

Hello,
You said "...The following products were some of the IC's that fit the specification I was looking for..."
Can you clarify which products are those?
Regards

0 JP over 9 years ago in reply to Elias Villegas M.

TI__Expert 3781 points

Elias,

Sorry about that, here they are below:

www.ti.com/.../tusb4041i
www.ti.com/.../tusb4020bi

Either way do we have any USB HUB controllers that are compatible with the HSIC standard?

Best Regards,
-Javier

0 Elias Villegas M. over 9 years ago in reply to JP

TI__Guru* 76130 points

Those devices does not support HSIC, and I am not aware of any that does within this group.
Can you elaborate more on the Customer's requirements? Is the HSIC a "must have" ?
Regards

0 JP over 9 years ago in reply to Elias Villegas M.

TI__Expert 3781 points

Elias,

This is something I need to verify, but from my understanding it is.

I will let you know if they are flexible with this requirement.

Regards,

Javier Palomo

Interface

Interface forum

USB HUBs and HSIC