tusb7340 flash burner for EEPROM

Mehdi Duman

Other Parts Discussed in Thread: TUSB7340

Hello

I wrote a message about this issue before and you sent me flash burner program from an e-mail. However, the message has been quarantined automatically by the email server. That's because of the type of the file(.exe) that you sent to me. Could you sent it as a RAR or a ZIP file or could you send it to mehdiduman@gmail.com ?

On the other hand, do you have any user manual for this software? How can I connect EEPROM to PC in order to program it by using your software? Can I use, TUSB7340 demo board or Do I have to use specific board for this purpose?

Thank you and best regards,

over 9 years ago

0 Elias Villegas M. over 9 years ago

TI__Guru* 76130 points

Hello,
The EEPROM shall be connected to the TUSB7340, you can use the demo board, the tool is very simple, you just select the Address and write the value, the value is written once you hit the "write" button.

0 Elias Villegas M. over 9 years ago in reply to Elias Villegas M.

TI__Guru* 76130 points

By the way, the gmail address you provided does not work even if I send a .zip file
Regards

0 Mehdi Duman over 9 years ago in reply to Elias Villegas M.

Prodigy 70 points

Hello Elias,

Thank you very much for your answer. Could you send the software as a .zip file to mehdi.duman@tubitak.gov.tr? On the other hand, I want to ask a question. As I understood, I am going to connect TUSB7340 demo board to my PC via PCIe slot and then I will run the software that you send to me. Am I right?

Best Regards

Interface

Interface forum

tusb7340 flash burner for EEPROM