Queston of TPS65982, PP_5V0 for Internal Power?

Other Parts Discussed in Thread: TPS65982

My customer ask us if PP_5V0 is used for internal power of TPS65892, According to block diagram in D/S (section 8.2), it seems PP_5V0 is internally connected to "Power Management and Supervisors" box. And customer also asked if so, how much power will consume from internal circuit at PP_5V0?

Best Regards

Naoki Yada

over 9 years ago

0 NY over 9 years ago

TI__Expert 3040 points

Sorry, I found from datasheet that PP_5V0 is not used for internal circuit, VIN_3V3 is used.

0 Brian Berner over 9 years ago in reply to NY

TI__Mastermind 30280 points

Thanks for the follow-up post Naoki! Glad you were able to answer this question from the TPS65982 datasheet. Please post new questions in a separate forum thread if you run into any other issues, and we'll just call this one closed.

0 NY over 9 years ago in reply to Brian Berner

TI__Expert 3040 points

Hi Brian,

Thanks. I have another question from customer as well, so I will post separately.

Interface

Interface forum

Queston of TPS65982, PP_5V0 for Internal Power?