• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 902 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65DP141, SN65LVCP1414 - Pull up and down resistor values

Kawai
Guru 19785 points
Other Parts Discussed in Thread: SN65LVCP1414, SN65DP141

Hi Team,

Please allow me to ask you about the pull-up and pull-down resistor value for SN65DP141 and SN65LVCP1414.

I see, 1k or 4.99k for pull-up and 1k or directly connected to GND for pull-down in the datasheet and the EVM schematic.

Is there any restrictions choosing these value ? Which would be the TI recommended value for each pull up and pull down resistor ?

Best Regards,

Kawai