TUSB211 with BC1.2 or divider mode

Keiichi Kajino

Expert 2365 points

Other Parts Discussed in Thread: TUSB211

Hi, folks

Is the TUSB211 suitable to use with BC1.2 or divider mode which is for charger standards?

over 10 years ago

0 Diego Cortes over 10 years ago

TI__Mastermind 36085 points

Hello Keiichi-san,

Yes it is suitable to use with BC, the TUSB211 is only active when HS signaling is detected, so the BC detection is not being affected by our device.

Regards,
Diego.

0 Keiichi Kajino over 10 years ago in reply to Diego Cortes

Expert 2365 points

Hello, Diego

Thank you for your reply.

Interface

Interface forum

TUSB211 with BC1.2 or divider mode