SN751178 / absolute maximum ratings

K.Yaita

Other Parts Discussed in Thread: SN751178

Hi Team,

Is there absolute maximum ratings of appling external voltage for output pin?
My customer wants to know if applying 5V to 1Y(14 pin) or 1Z(13 pin) could damage the device.
I heard he mistaked to apply 5V to output pin.

Best Regards,
Yaita

over 8 years ago

0 Ron Michallick over 8 years ago

TI__Guru**** 150166 points

Kensuke san,

Is the 5V the same 5V that is used for the VCC pin?

0 K.Yaita over 8 years ago in reply to Ron Michallick

Guru 29710 points

Hi Ron-san,

Thank you for your support.

>Is the 5V the same 5V that is used for the VCC pin?
No, I heard it is different from that is used for VCC.

Best Regards,
Yaita

0 K.Yaita over 8 years ago in reply to K.Yaita

Guru 29710 points

Hi Ron-san,

Is there any update?
Your support would be appreciated.

Best Regards,
Yaita

0 Ron Michallick over 8 years ago in reply to K.Yaita

TI__Guru**** 150166 points

Kensuke-san,

If the output pin is programmed to be high then there won't be any stress to the SN751178.

If the output pin is programmed to be low then there will be high stress to the SN751178.
The current is limited but the dissipated power will overheat the device.

Interface

Interface forum

SN751178 / absolute maximum ratings