• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 560 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Configure retimer (DS125DF410)

Can Van Quyen
Prodigy 115 points

Other Parts Discussed in Thread: DS125DF410

Dear all,

I'm working on retimer (DS125DF410) to configure Ethernet mode.

Could you please show me the registers that I need to configure to Ethernet mode.

Thanks & Best regards,

  • 0
    TI__Mastermind 19235 points

    Hi. The DS125DF410 actually defaults to 10GE/1GE retimer mode. But you may configure a given channel to Ethernet mode by writing 0xF6 to channel register 0x2F. Moreover, you may choose to do a broadcast command to configure all four channel to Ethernet mode as per below:

    0xFF       0x0C        //Select broadcast write

    0x2F       0xF6        //Ethernet mode

    Regards,

    Rodrigo Natal

    DPS Applications Engineer