MIPI DSI to Displayport

K.Yaita

Other Parts Discussed in Thread: SN65DSI86

Hi Team,

My cusotmer is looking for "MIPI DSI to Displayport" bridge IC.
I found SN65DSI86 but the output of it isn't Displayport but eDP and he wants to output to Displayport connector.

Is there any solution to output Displayport including 2 chip solution?

Best Regards,
Yaita / Japan disty

over 9 years ago

0 Joel Jimenez0 over 9 years ago

TI__Mastermind 18655 points

Hello Yaita,

The DSI86 can support both eDP and DP. VOD values can be changed thru I2C register. If they want eDP VOD values, then they need to change the CSR default values.

Regards

0 K.Yaita over 9 years ago in reply to Joel Jimenez0

Guru 29720 points

Hi Joel-san,

Thank you for your support.
I understood DSI86 can support DP and can be connected to DP connector.

If my customer also wants to transmit audio data(I2S), is there any solition?

Best Regards,
Yaita

0 Joel Jimenez0 over 9 years ago in reply to K.Yaita

TI__Mastermind 18655 points

Hello Yaita-san,
The DSI86 does not support that feature. As per my understanding, the customer can use the DS90UB926Q, this device is fully supported in the HSI forum.

e2e.ti.com/.../

Regards

Interface

Interface forum

MIPI DSI to Displayport