Does TFP410 needs a reset when work without I2C

Jason Shen

Intellectual 1975 points

Other Parts Discussed in Thread: TFP410

Dears

If the PIN13 ISEL/RST of TFP410 is connect to ground, work without I2C, how to reset the IC?

Work without I2C, only need to set (BSEL, DSEL, EDGE, VREF) and state pins (PD, DKEN), right?

Thanks for your help

over 9 years ago

0 Elias Villegas M. over 9 years ago

TI__Guru* 76130 points

Hello,

The device only requires a reset when configuring via I2C.

They don't need the reset in this case.

When not using the I2C interface and they want to reset the device they should use the PD/ pin.

Regards

Interface

Interface forum

Does TFP410 needs a reset when work without I2C