SN65DP141 - Pin setting used in GPIO mode

Kawai

Guru 19785 points

Hello Team,

Please allow me to ask you about the pin settings when DP141 used in GPIO mode.

Are the EQ1/0 and RX_GAIN pin settings able to be changed on the fly or is the logic setting only read at POR only ?

Best Regards,

Kawai

0 Moises Garcia over 9 years ago

Hi Kawai-san,

RX_GAIN and TX_DC_GAIN changes the gain on the fly, EQ should have the same behavior.

Regards

0 Kawai over 9 years ago in reply to Moises Garcia

Guru 19785 points

Hi Moises-san,

Thank you for your prompt reply.

Best Regards,
Kawai

Interface forum