given TI # DS90UB933-Q1 IC

anthony magari

NEED SOLDER PASTE REQUIREMENTS FOR WQFN PACKAGE. CAN'T OPEN AN-1187/SNOA401 SPEC DEFINED IN PART DATA SHEET, PG 41. PLS ADVISE.

THX

Anthony

over 9 years ago

0 anthony magari over 9 years ago

Prodigy 20 points

pcba designer needs to specific areas to apply solder paste and if thermal tie in via's are required?

0 Clancy Soehren over 9 years ago in reply to anthony magari

TI__Mastermind 23810 points

Anthony,

I've moved your question to the high speed interface forum, where the part you are working with is supported.

0 Michael Lu (Santa Clara) over 9 years ago in reply to Clancy Soehren

TI__Mastermind 29655 points

Hi Anthony,

Seems like there may be a link broken in the datasheet. AN-1187 is available by searching for the information on Google: www.ti.com/.../snoa401r.pdf

Thanks,

Michael

Interface

Interface forum

given TI # DS90UB933-Q1 IC