Analog Launchpad USB2ANY Firmware version

Konstance chambliss

Other Parts Discussed in Thread: USB2ANY, DS90UB949-Q1, ALP

I am trying to run the Analog Launchpad Framework Utility software on a computer but I received an error message about not having the updated USB2ANY firm version 2.5.0.0. How do I update the firmware version? Is there a link I can download it from?

over 9 years ago

0 Praveen Aroul over 9 years ago

TI__Mastermind 49956 points

Hi Konstance,

I am moving your post to the Interface forum that covers the Analog Launchpad Framework utility. I'm sure you'll find an answer here.

0 Michael Lu (Santa Clara) over 9 years ago

TI__Mastermind 29655 points

Hi Konstance,

If you are using Analog Launchpad, the tool should have firmware already available to update from the version you have. Is your USB2ANY empty? What device are you attempting to use Analog Launchpad with?

Regards,

Michael

0 Konstance chambliss over 9 years ago in reply to Michael Lu (Santa Clara)

Prodigy 50 points

I have a 1080p HDMI to FPD-Link III Bridge Serializer DS90UB949-Q1. Yes I think it is. Do I need to have a USB2ANY component to connect to the PC?

0 Konstance chambliss over 9 years ago in reply to Konstance chambliss

Prodigy 50 points

I don't have the USB (USB2ANY). If I need it in order to run the Analog Launchpad, how do I purchase it?

0 Nasser Mohammadi over 9 years ago in reply to Konstance chambliss

TI__Guru* 93670 points

Hi Konstance,
Normally USB2ANY is not sold by itself. It usually comes with an evaluation board. You can use Aardvark and it has the same functionality. Here is a link to Aardvark:
www.totalphase.com/.../

Regards,,nasser

0 Michael Lu (Santa Clara) over 9 years ago in reply to Konstance chambliss

TI__Mastermind 29655 points

Hi Konstance,

If you specifically need to use ALP, then I recommend getting in touch with a local TI sales representative to obtain a USB2ANY board that you can use in order to operate the software to control your board. Alternatively, you can purchase an EVM in which the USB2ANY is kitted, then only use the USB2ANY.

Unfortunately, like Nasser said, these items are not sold separately per TI policy.

Thanks,

Michael