DS100DF410 EERPOM format

Patrick Chen

Other Parts Discussed in Thread: DS100DF410, DS100DF410EVK

Hello,

Customer would like to use DS100DF410 that setting master mode to read external EEPROM. Do we have EEPROM configuration and command format doc that provide to customer for setting? Which EEPROM is recommend for customer reference? Thank you.

Patrick

over 9 years ago

0 Michael Lu (Santa Clara) over 9 years ago

TI__Mastermind 29655 points

Hi Patrick,

I recommend that the customer uses SigCon Architect's EEPROM tab to generate the .hex file. They can reference information about hex file format from the following application note: http://www.ti.com/lit/an/snla245/snla245.pdf

Also, they can reference how to use SigCon Archtiect to generate the .hex file by referencing the DS100DF410EVK User's Guide: http://www.ti.com/lit/ug/snlu126c/snlu126c.pdf

Thanks,

Michael

Interface

Interface forum

DS100DF410 EERPOM format