• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 1440 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Asking for P82B96 schematic review

SHH
Mastermind 31176 points
Other Parts Discussed in Thread: P82B96

Hi Team,

Could you help review P82B96 schematic?

Thanks,

Scott

  • 0
    TI__Mastermind 20835 points

    Hello Scott,

    Can you verify that the "SDA-BE-IF" is connected to "SDA-SET-IF" on another page of your schematic, which probably means a harness.  I am also wondering if you did it similarly for SCL.  Can you provide me a diagram or schematic that verifies that connection?

    There is a sample schematic from the datasheet, figure 10, that shows how it should be connected. 

    -Francis Houde