• Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 489 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB947-Q1 and DS90UB948-Q1 EVM link questions,thanks

Kailyn Chen
Genius 9560 points
Other Parts Discussed in Thread: DS90UB947-Q1, DS90UB948-Q1

Dears；

  Do you recommend  which type of  panel mount connectors could be used for DS90UB947-Q1 and DS90UB948-Q1 EVM except STP cable？

Best regards

Kailyn

  • TI__Genius 13475 points
    Kailyn

    The most common interconnect for the DS90UB947 - '948 is a dual, shielded twisted pair cable. Most of our EVMs use the Rosenberger HSD connector, and the most common cable is a jack-jack cable/connector. The connector used on our board is the D4S20L-40MA5-Z which is a PCB mount, right angle HSD connector, and the housing has a groove around the edge to facilitate panel mounting. The D4S10A-1D5A5-y is a version which allows connection of a cable to the connector (DACAR 535/588) and is panel mountable.