• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 638 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS32EL0421 output impedance 75 ohm single ended

user4766561
Prodigy 170 points

Other Parts Discussed in Thread: DS32EL0421, DS32ELX0421

Hello,

According to the datasheet "the DS32EL0421 and DS32ELX0421 have internal termination resistors".

Has this chip an internal terminations circuits (coil parallel to resistor and capacitor in series) ?

Thanks in advance!

  • 0
    TI__Mastermind 29655 points
    Hi,

    The internal terminations are as specified in p. 7 of the LVDS Electrical Specifications. These input terminations are nominally 100-ohms diferentially across the LVDS inputs. If you are implying a Return-Loss network (inductor in paralle with resistor, followed by capacitor in series), this will need to be added externally.

    The output termination is also just a pair of internal resistors, one for each polarity, and these output terminations can be programmed to be either 50-ohm or 75-ohm.

    Regards,

    Michael