• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 747 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83867 drive strength of MAC interface signals

Ryuuichi machida
Guru 12845 points


Hi,
I would like you to confirm whether user can change drive strength of RX_xxx (MAC receive signals).


According to datasheet, rise/fall time of these signals should be less than 0.75ns. However, customer observed that rise/fall time of RX_xxx signals exceed specification of datasheet (this means slow rise/fall time was observed).


So could you please confirm above ?

Best  Regards,

Machida