DS90UH949-Q1/Update Procedure for Internal EDID (SRAM)

Orobianco-Italy

Other Parts Discussed in Thread: DS90UH949-Q1

Hi TI,

I would like to know the procedure to update " Internal EDID (SRAM)" .
I could not find it though I confirmed a data sheet of DS90UH949-Q1.

Would you please inform me if you have the documents related to it?
If not , Please tell me the procedure in detail by mail(E2E).

Thank you for your help.

Best Regards,
Orobianco

over 8 years ago

0 Orobianco-Italy over 8 years ago

Intellectual 930 points

Hi TI,
Someone, Would you please answer to this?
My customer can not design without this answer.
Important development is delayed, it will be a serious problem.

Thank you for your help.

Best Regards,
Orobianco

0 Jason Blackman over 8 years ago in reply to Orobianco-Italy

TI__Genius 14015 points

We have an example python script that loads the internal EDID. This script is included in the install directory of the Analog Launchpad GUI, available here: http://www.ti.com/tool/ALP

Once installed, find the EDID script in this path: C:\Program Files (x86)\Texas Instruments\Analog LaunchPAD v1.56.0010\Profiles\FPDL3Base\edid_load.py

Thanks,
Jason

0 Orobianco-Italy over 8 years ago in reply to Jason Blackman

Intellectual 930 points

Jason-san,

Thank you for your reply.
However, my customer does not have DS90UH949 EVM and does not use the Analog Launchpad GUI either.
Would you please inform me the other way (related to the procedure to update Internal EDID (SRAM))?

Thank you for your help.

Best Regards,
Orobianco

Interface

Interface forum

DS90UH949-Q1/Update Procedure for Internal EDID (SRAM)