Design support for CSI Synchronous mode using DS90UB953-Q1 and DS90UB954-Q1

Sundararao Yanamala

Other Parts Discussed in Thread: DS90UB954-Q1, DS90UB953-Q1

Hello,

We are in product development stage using DS90UB953-Q1 and DS90UB954-Q1 devises for automotive application.
BTW, we need some more clarity on DS90UB953-Q1 datasheet statement,
"CSI Synchronous mode – FPD Clock reference derived from deserializer".
How can we get the serializer required clock from Deserializer?
May i get the reference design for CSI Synchronous mode to access multiple cameras?

over 8 years ago

0 Scott Monroe over 8 years ago

TI__Mastermind 20590 points

Hi Sundararao,

These devices are supported by the high speed interface team. I'm going to move this post to the forum where questions on these devices are answered.

Scott

0 Mark Sauerwald88474 over 8 years ago

TI__Genius 13475 points

The DS90UB953 and DS90UB954 are in the development stage so there is not yet a published reference design for these products. Please contact your local TI support team to get more information on these devices.

Interface

Interface forum

Design support for CSI Synchronous mode using DS90UB953-Q1 and DS90UB954-Q1