Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 654 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TRS3221 - Schematic Questions

Waqas Haque
Intellectual 1185 points
Other Parts Discussed in Thread: TRS3221, SN74AUP1T50

Hi,

I am using the TRS3221 in a UART application (PC -> DB9 -> TRS3221). The logic level for my device is 2.5V (3.3V input tolerant) therefore I am using a level shifter, SN74AUP1T50, only on DIN.

My question is, do I need a pull up on DIN?

Secondly, I noticed that the TRS3221 inverts the input before putting it on the output. Is that typical UART operation?

Thanks.