TUSB4041

Jim CHEN

Expert 4795 points

Hi Sir,

Could I use I2C or SMbus to choose output port?

Or we just can enable or disable the port.

Thank you

over 9 years ago

0 Elias Villegas M. over 9 years ago

TI__Guru* 76130 points

Hello,
You can just disable the port.
What do you mean by choose port? Can you elaborate more?
Regards

0 Jim CHEN over 9 years ago in reply to Elias Villegas M.

TI__Expert 4795 points

Hi Sir,

I mean could I choose the port I want to output the signal?
For example, today we have A,B,C and D port, then I want to use B port as output.
So I use the I2C or SMbus to control the signal go through the port B.

Regards

0 Elias Villegas M. over 9 years ago in reply to Jim CHEN

TI__Guru* 76130 points

Hello,

I don't understand, this is not a switch, can you elaborate more on what you are trying to do.

Regards

Interface

Interface forum

TUSB4041