SN65C1168E current consumption

NAOKI AOYAMA

Guru 11215 points

Other Parts Discussed in Thread: SN65C1168E

Hello,

Our customer use the SN65C1168E.

The customer want to know the current consumption under condition as follows.

VCC=5V

Data rate : 10Mbps

RL=100ohm

Ta=85degree

How about the current consumption?

Best Regards,

Naoki Aoyama

over 9 years ago

0 Michael J Schultis over 9 years ago

TI__Mastermind 25115 points

Hello Naoki-san,

Data that we have readily available shows that the current consumption of 1 driver and 1 receiver with 5V VCC and no load consumes approximately 5.5mA at 10Mbps.

To run this specific testing would require additional bench testing, and due to the upcoming holiday here in the US, we will likely not be able to run this testing until next week.

Please let us know if you have any additional questions and we would be happy to help.

Best,
Michael

0 Michael J Schultis over 9 years ago in reply to Michael J Schultis

TI__Mastermind 25115 points

Hello Naoki-san,

The ICC total is typically the ICC value with no load, plus the differential output voltage (VoDIFF)/100 Ohms.

Best,
Michael

0 NAOKI AOYAMA over 9 years ago in reply to Michael J Schultis

Guru 11215 points

Hello Michael,
Thank you for your reply.
I will calculate the ICC.

Thanks,
Naoki Aoyama

Interface

Interface forum

SN65C1168E current consumption