TUSB211 max EQ in dB

user4760726

Other Parts Discussed in Thread: TUSB211

Hi Team,

One of our customers is wondering that what the maximun loss the TUSB211 can compensate at receving end(EQ) in dB is. Is it possible to provide the information please?Thanks for your support.

Leroy

over 8 years ago

0 Diego Cortes over 8 years ago

TI__Mastermind 36085 points

Hello Leroy,

What the TUSB211 does is to improve the HS signal's slew rate, so there is no direct translation to dB equalization, please refer to the datasheet section 8.2.3 for a performance example of the TUSB211 under each EQ level.

Regards,
Diego.

0 Diego Cortes over 8 years ago in reply to Diego Cortes

TI__Mastermind 36085 points

Hello Leroy,

My bad, there is a close approach in dB for the EQ level:

EQ0 is 1dB
EQ1 is 2dB
EQ2 is 3dB
EQ3 is .4dB

Regards,

Diego.

Interface

Interface forum

TUSB211 max EQ in dB