• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 405 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Active Clock during Suspend (TUSB1210)

Hannes Muhr
Prodigy 20 points
Other Parts Discussed in Thread: TUSB1210

Hello,

we use the TUSB1210 USB transceiver and want to put it into Suspend mode (over ULPI). However, we would like to use the output clock from the chip even when in low power mode. Is there a way to do so?

Thank you!

  • 0
    TI__Genius 11280 points

    Hello Hannes,

    When the device is in Suspend mode the PHY power down almost all the blocks including the CLOCK. Thereby either the REFCLK is not needed in suspend mode.

    Regards,

    Gerardo

    Consider checking the "Verify Answer" button if I've answered the question