Hi Sirs,
Our Customer ask how to fine tune the USB 2.0 and USB 3.0 Redriver Evaluation Module to support 10M cable.
Thanks,
http://www.ti.com/tool/usb-redriver-evm?keyMatch=USB%20REDRIVER%20EVM&tisearch=Search-EN-Everything
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Sirs,
Our Customer ask how to fine tune the USB 2.0 and USB 3.0 Redriver Evaluation Module to support 10M cable.
Thanks,
http://www.ti.com/tool/usb-redriver-evm?keyMatch=USB%20REDRIVER%20EVM&tisearch=Search-EN-Everything
Hello Allen,
On USB2 it is possible to handle 10m using two re-drivers in cascade (TUSB211) however, USB3 won't be functional due to the higher loss under 10m cable.
Regards,
Diego.