• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 925 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TS3DV642: May we have Displayport 1.2 switch with re-driver IC? or can we use TS3DV642 + redirver IC?

Chen Bogey8
Mastermind 9990 points
Part Number: TS3DV642
Other Parts Discussed in Thread: HD3SS212, HD3SS213, HD3SS215, HD3SS214, SN75DP130

Hi Sir

May we have Displayport 1.2 switch with re-driver IC? or can we use TS3DV64 + redirver IC?

if yes, may you have suggest ic?

                                                  Bogey

  • 0
    TI__Mastermind 45575 points
    Bogey,

    The TS3DV642 is a passive FET switch, which can be ideally modeled as a 0 ohm wire, so it will not be an issue to use with a redriver. I will move this thread to the consumer and computing forum for assistance with a redriver.

    Thank you,
    Adam
  • 0 in reply to Adam Torma
    TI__Mastermind 23815 points
    Hi Chen,

    The TS3DV642 doesn't belong to our group, we have the passive switches HD3SS212, HD3SS213, HD3SS214 and HD3SS215 depending on your needs.
    For DP1.2 you can use SN75DP130 as a redriver and SNx5DP159(x-mode) as retimer.
    Since we don't have switches with EQ for DP, you will need a two chip solution.

    Regards