• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 605 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65982: Application Customization Tool, Device Initilization Chain

Tamio Yokokura
Expert 3780 points
Part Number: TPS65982

USB PD Support team,

How to select I2C_ADDR from the pull-down list in the Device Pin Strapping?

This list is different from external resistor value in Table 10 of TPS65982 datasheet.

Regards,

Tamio

  • 0
    TI__Mastermind 36751 points
    Hi Tamio,

    The resistor values in the Datasheet are the correct resistor values. In the tool, the address is numbered 0-7. Please refer to this when selecting the address.
    We have logged this issue and will update it in the next release of the tool.

    Thank you,
    Eric