• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 521 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TFP401: Unused QE pin and how to usage of CTLx pin

Nariaki Ogasawara
Intellectual 1215 points
Part Number: TFP401

Hi Team,

My customer is considering to use TFP401 for HDMI to LVCMOS.

Q1. His application is RGB 18bit,  he does not use six QE pins.

 Which is better, GND, or Open?

Q2. How to usage CTLx?

       Please teach me usage example of CTLx pin .

Regards,

Ogasawara

  • 0
    TI__Guru* 76130 points
    Hello,
    Q1. Do not left unused pins floating, you can connect them to GND.
    Q2. CTLx signals are used by your graphics processor to send additional information during the blanking periods, the TFP401 will de-serialize this data and output at the CTLx pins, I suggest you to connect the CTLx outputs to your RGB receiver, if your RGB receiver does not support CTLx then you can leave them floating.
    Regards