DP83822HF: Pin behavior in Power Down

Mihir Gupta65

Part Number: DP83822HF

Hi Team,

A customer is asking about the behavior of the Pins in Power Down Mode. What do the Pins do during this state? Are they pulled up, pulled down, floating, High-Z, or something else?

Thanks and Regards,

Mihir Gupta

FAE - South Germany

over 8 years ago

0 Rob Rodrigues over 8 years ago

TI__Mastermind 19780 points

Hi Mihir,

The pins may act differently during power down based on what group they belong to. Which pins specifically were you interested in?

Regards,

0 Mihir Gupta65 over 8 years ago in reply to Rob Rodrigues

TI__Intellectual 2155 points

Hi Rob,

Well all of them really. The datasheet seems to be pretty sparse on this information.

Regards,

Mihir

0 Aniruddha Khadye over 8 years ago in reply to Mihir Gupta65

TI__Mastermind 18425 points

Hi Mihir,

The IO pins should be high-Z but some pins have internal pulls on them. The datasheet has details regarding which pins have pull-up and pull-downs. Additionally there might be external pulls on the board for strapping. So the voltage will depend on combination of internal and external pull resistors.

-Regards,
Aniruddha

Interface

Interface forum

DP83822HF: Pin behavior in Power Down