LMH0340: XilinxFPGA-LMH0340 SDI video firmware code.

F.N

Part Number: LMH0340

Hi team,

My customer wants to get XilinxFPGA-LMH0340 SDI video firmware code.

The customer downloaded "SDXILIP-1.0-windows-installer.exe"file from the following TI site and
executed the exe-file and then got "Firmware Description Xilinx.doc"file.

・TI site : www.ti.com/.../broadcast_video_serdes_ip
・Firmware Description Xilinx.doc：Firmware Description Xilinx.doc

In the doc-file, the firmware module names are described, for example "cpu_clk" in page.10,
and the module names are linked to the destinations, but the link destinations are not created
on drive C.　 For emample, "cpu_clk" is linked to "C:\temp\xil_doxy\html
\classipt__top_85e3ba1c6ee82bbf9a139a7145467b2a.html#85e3ba1c6ee82bbf9a139a7145467b2a", but
the link destination is not created on Drive C.

The customer wants to know how to get these firmware code.
Please let me know.

Best regards,
Fumio Nakano
PIC Japan

over 7 years ago

0 F.N over 7 years ago

TI__Expert 8760 points

Hi team,

There is no linked destination folder as FPGA code file folder.
But I found the RTL-Verilog and RTL-VHDL codes respectively in
RTL_VERILOG_XILINX and RTL_VHDL_XILINX folders at C:Program Fil(x86):
SDXILIP-1.0:Xilinx:NSM_SINGLELINK_31Jan12_Xilinx.zip:NSM_SINGLELINK.

Thank you.

Best regards,
Fumio Nakano

0 Nasser Mohammadi over 7 years ago in reply to F.N

TI__Guru* 93670 points

Greetings Fumio-San,

I apologize for the delay. The files you see there are what we have. This was meant to be used just as an example. Please let us know about this application. This FPGA example code was developed by a third party.

Regards,,nasser

0 F.N over 7 years ago in reply to Nasser Mohammadi

TI__Expert 8760 points

Nasser-san,

Thank you for your reply.

The cutomer wants to input SD-SDI（STPTE259M-C）signal to LMH0340 and let LMH0340 output
images to a monitor.

I think the customer can generate FPGA codes from the RTL_VERILOG_codes or RTL_VHDL_codes
which there are in NSM_SINGLELINK_31Jan12_Xilinx.zip.

The FPG code you have is for STPTE259M-C ?

Best regards,
Fumio Nakano

0 Nasser Mohammadi over 7 years ago in reply to F.N

TI__Guru* 93670 points

Hi Fumio-San,

Yes LMH0340/341 FPGA codes support SMPTE259M, SMPTE292, and SMPTE424. We used to have a demo/evaluation board. If needed we can send you the schematic for this board.

Regards,,nasser

0 F.N over 7 years ago in reply to F.N

TI__Expert 8760 points

Nasser-san,

Thank you for your offer.
Please send me the schematic.

May I offer the schematic to the customer?

Best regards,
Fumio Nakano

0 Nasser Mohammadi over 7 years ago in reply to F.N

TI__Guru* 93670 points

Fumio-San,

Please attached note this schematic.

Regards,,nasser

LMH0040 EVK Schematic 30June08.pdf

0 F.N over 7 years ago in reply to Nasser Mohammadi

TI__Expert 8760 points

Nasser-san,

Thank you!!

Best regards,
Fumio Nakano

Interface

Interface forum

LMH0340: XilinxFPGA-LMH0340 SDI video firmware code.