RS485-FL-DPLX-EVM: RS485-FL-DPLX-EVM Dimensions

Jim Denison

Expert 3120 points

Part Number: RS485-FL-DPLX-EVM

Hello,

I have a request for the dimensions and hole locations on the RS485-FL-DPLX-EVM. Can you help with that?

http://www.ti.com/tool/RS485-FL-DPLX-EVM?keyMatch=RS485-FL-DPLX-EVM&tisearch=Search-EN-Everything

Thank you for your time!

over 8 years ago

0 Michael Peffers over 8 years ago

TI__Mastermind 20820 points

Hi Jim,

Here are the board files and BOM for the RS-485 full duplex EVM. The board was done using cadence so the customer should use this to open the layout file. If they cannot let me know and I will go into the tool and measure stuff for them but I believe giving them the files provides them the most flexibility.

Full Duplex Board Files.zip

0 Jim Denison over 8 years ago in reply to Michael Peffers

TI__Expert 3120 points

Thank you very much Michael.
I will forward this and hope that they have cadence available.

Interface

Interface forum

RS485-FL-DPLX-EVM: RS485-FL-DPLX-EVM Dimensions