DS90UB954-Q1: DS90UB953-Q1.

Jin-Suk Choi

Intellectual 2280 points

Part Number: DS90UB954-Q1

Hi~

Is it possible below SERDES scheme?

DS90UB913 -> DS90UB954, ok?

And then,

DS90UB953 -> DS90UB914, is that okay?

Let me have your feedback.

Thanks.

over 8 years ago

0 Michael Raleigh over 8 years ago

TI__Expert 3245 points

Hi Jin-Suk,

Yes, these modes are supported:

Regards,

0 Jin-Suk Choi over 8 years ago in reply to Michael Raleigh

TI__Intellectual 2280 points

Hi~ Michael. Thank you for your feedback.

Do we have any document which described this? If there is any diagram or document what support chain, please, share with me.

Thanks.

0 Michael Raleigh over 8 years ago in reply to Jin-Suk Choi

TI__Expert 3245 points

Hi Jin-Suk,

After the 953/954 are fully released the full datasheets will be available on the web which will give more detail on reverse compatibility modes. You will essentially put the 95x devices in lower clock/ data modes to match the lower clock/ data speeds of the 913/914 respectively.

Regards,

Interface

Interface forum

DS90UB954-Q1: DS90UB953-Q1.