GD75232: Layout Trace Length

Jim CHEN

Expert 4795 points

Part Number: GD75232

Dear Team,

I would like to know the layout trace length from GD75232PWR to connector. What is the maximum value of length?

If I put it near to connector about 3 inches, is it fine with that?

And how about the trace length from Super IO to GD75232PWR?

Thank you.

over 8 years ago

0 Daniel R Noel over 8 years ago

TI__Intellectual 840 points

Hi Jim,

Are you referring to the trace length from the communication IO's to a DB9S connector like in the image below?

And could you share a schematic because I am not quite sure what you mean by Super IO to GD75232?

Regards,

Daniel Noel

0 Daniel R Noel over 8 years ago in reply to Daniel R Noel

TI__Intellectual 840 points

Hi Jim,

A 3 inch trace line to the main connector (the DB9S on the image above) should be fine. Could give me more detail on what the super IO is?

Regards
Daniel Noel

0 Jim CHEN over 8 years ago in reply to Daniel R Noel

TI__Expert 4795 points

Hi Daniel,
Thank you for your reply.
Sorry for the confusion, what I want to know is the distance from the host to GD75232.
Thanks.

Interface

Interface forum

GD75232: Layout Trace Length