• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 1017 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Asking for the RS232 traceiver solution

SHH
Mastermind 32506 points

Other Parts Discussed in Thread: TRS3122E


Hi Team,
Do we have solution for RS232 traceiver?
here is the block diagram. 1.8V t0 10V.


Thanks,
SHH

  • 0
    TI__Guru 62920 points
    Hi SHH,

    Take a look at TRS3122E. It is a 2 TX / 2 RX RS-232 transceiver that supports logic levels of 1.8 V. In fact, it allows for a unique "voltage tripler" mode of operation that even allows VCC to extend down to 1.8 V in case a higher-voltage rail is not available. The RS-232 output voltage is typically around +/- 5 V (or a little higher or lower depending on VCC voltage) with 3-kOhm loading, but this is common for RS-232 parts. (RS-232 receivers are sensitive enough that larger voltage swings are often not needed.)

    Please let us know your feedback on this part and any other questions you might have.

    Best regards,
    Max