TCAN1051HV: Figure.7 and Figure.8 on datasheet

ACGUY

Guru 11170 points

Part Number: TCAN1051HV

Hi,

Why are Figure.7 and Figure.8 the same? Are they correct?

Regards,

ACGUY

over 9 years ago

0 Miguel Robertson over 9 years ago

TI__Guru 62920 points

Hi ACGUY,

This is a mistake. TPROP(LOOP) should be measured between TXD and RXD transitions and does not involve the S pin. Thank you for pointing this out - we will work to correct the document.

Regards,
Max

0 ACGUY over 9 years ago in reply to Miguel Robertson

Guru 11170 points

Hi Max,

Thank you for reply.
The correct answer is the same as in Figure 8 of TCAN1042 datasheet?

Regards,
ACGUY

0 Miguel Robertson over 9 years ago in reply to ACGUY

TI__Guru 62920 points

Yes, that is the correct figure.

Best regards,
Max

Interface

Interface forum

TCAN1051HV: Figure.7 and Figure.8 on datasheet