• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 683 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

tlk105: TX_CLK in RMII mode

Di Wang
Expert 1740 points

Part Number: TLK105
Other Parts Discussed in Thread: TLK105L, TLK105

Hi,

It is stated TX_CLK is unused in RMII mode, but I still measured it output a 25MHz clock. Is it a normal operation?

Another question is what is the difference between TLK105 and TLK105L?

Thanks.

  • 0
    TI__Mastermind 23675 points
    Hi Di,

    This is not an issue. If you want to confirm RMII operation though, you can read register 0x17h to confirm RMII operation.
    Additionally, when receiving data you should only see RX_D[1:0] toggling.

    The difference between TLK105 and TLK105L is that the TLK105L support 1588 SFD.

    Kind regards,
    Ross