SN65DP141: EVM test Fail

Kai Hsiao

Guru 12675 points

Part Number: SN65DP141
Other Parts Discussed in Thread: DP141RLJEVM

dear SIr

We test DP141 EVM ,but the result is fail ,please kindly help to advise

Below is test report and test equipment

DP141RLJEVM-20170524.rar

over 8 years ago

0 Moises Garcia over 8 years ago

TI__Mastermind 23815 points

Hi Kai,

The DP141 may be saturating, if the Vid is larger than 600mV apply a -6dB attenuation on RX_GAIN.
If the signal is still attenuated try reducing EQ and setting TX_GAIN=0dB.

Regards

Interface

Interface forum

SN65DP141: EVM test Fail