This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RS-485: Unit-load with fail-safe circuits

Our customer has a question about the unit-load of RS-485.
I'm posting the question for the customer:

++++++++++++++++++++++++++++++++++++++++++++++

Would you please let us know how to calculate the value of unit-load (u.l.)
in the tables of "Figure 7. External 485 Failsafe Circuits"?

Refer to the following;

Application Report,"Interface Circuits for TIA/EIA-485 (RS-485)", page 11
(Document number: SLLA036D)

We need the unit-load on our circuits of RS-485 bus with fail-safe
resistors like as the a) circuit of Figure 7.

++++++++++++++++++++++++++++++++++++++++++++++

Thank you in advance.

Best regards,
Takishin