• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 358 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB7340: Can overcurrent detection be disabled?

Yee Yong Teo
Expert 4335 points
Part Number: TUSB7340

Hi,

Can the overcurrent detection be disabled? Can it be done through software or must left the pin floating?

Thanks.

- YY

  • 0
    TI__Guru* 76130 points
    Hello,
    It can not be disabled.
    If you don't want the over-current detection you can just pull-up the overcurrent# pins and not connect them to anything else.
    The over current detection is required for USB certification if the USB ports are external, it is not required for a embedded implementation.
    Regards