• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 4646 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

A question for Bob Smith

Lee, Sam
Expert 6255 points

Other Parts Discussed in Thread: TPS23861

Hi team,

A customer sees the following sentence (red line)  in an app note (slva531a: TLK1XX Design and Layout Guide). PoE applications have the Bob Smith termination, doesn't it? Can you explain what this means?

 

Thanks,

Sam Lee

  • 0
    TI__Mastermind 23675 points
    Hi Sam,

    You cannot use bob smith termination because you are not terminating the cable facing side of the center tap.
    The energy is transferred from the PSE to the PD using the cable and center tap.

    Kind regards,
    Ross
  • 0 in reply to Ross Pimentel
    TI__Expert 6255 points

    Hi Ross,

    Thank you for your reply. I'm sorry I didn't understand your explanation exactly.

    For example, below pictures are the schecmatics of PSE and PD application. I see the bob smith termination, is that right? Can you give a little more explanation?

    -. PSE application (in TPS23861 EVM)

    -. PD application (in TPS2375A EVM)

    Thanks,

    Sam Lee