TPS2065: internal EN pin

Yuto Sakai

Mastermind 6100 points

Part Number: TPS2065

Hi,

Could you tell me about TPS2605.

Does the device's EN pin has internal pull-down resister?

Best Regards,

Yuto Sakai

over 7 years ago

0 Yuto Sakai over 7 years ago

Mastermind 6100 points

Hi all,

I have not gotten your answer about this post.
Could anyone give me answer?

Best Regards,
Yuto Sakai

0 Michael Tan over 7 years ago in reply to Yuto Sakai

TI__Expert 8420 points

Hi Sakai-san,
Sorry for miss your question, the device internal EN is actived pull up a resistor to High voltage . If you connect this pin to ground the device will disable .

0 Yuto Sakai over 7 years ago in reply to Michael Tan

Mastermind 6100 points

Hi Tan-san,

Thank you for your reply.

I'm sorry, I really wanted to know about TPS2065"D".

According to the data sheet of TPS2065D, it is written in the section 「8.3.2 Enable」

"The enable should not be left open, and may be tied to VIN or GND depending on the device".

And I think that the device does not have an internal pull-up and pull-down resistor,is it correct?

Best Regards,

Yuto Sakai

0 Michael Tan over 7 years ago in reply to Yuto Sakai

TI__Expert 8420 points

Hi Sakai-San,
I need to double check with our designer. For general cosideration the EN pin is more senstive, we can't let this pin floating at any case .

0 Yuto Sakai over 7 years ago in reply to Michael Tan

Mastermind 6100 points

Hi-Tan-san,

I understand.

I am waiting for your reply as a result of your confirmation.

Best Regards,

Yuto Sakai

0 Michael Tan over 7 years ago in reply to Yuto Sakai

TI__Expert 8420 points

Hi Sakai-san,

Just confirmed with our designer , the internal EN pin haven't any resistor pull up and pull down internal . It is sensitive pin, so don't let it floating anytime .

Interface

Interface forum

TPS2065: internal EN pin