• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 344 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB211: EQ gain setting Resistor(R1)

Kotaro Yamashita
Intellectual 2570 points
Part Number: TUSB211

Hi Team,

D/S figure 1. show the EQ gain setting vs R1 value table below.

Level0 100

Level1 1800

Level2 3900

Level3 9100

Customer would like to know if they set the other value (e.g. 1kohm, 5kohm) for R1, which EQ gain is selected?

Regards,

Kotaro Yamashita

  • 0
    TI__Mastermind 36085 points

    Hello Yamashita-san,

        The TUSB211 only has 4 EQ levels, and the selection of each level is determined by an internal comparator, so the selected EQ level will be the one with the closest to the resistor value. the best option is to use any of the recommended values.

    Regards,

    Diego.