TMDS181: EyeScan Tool wit TMDS181 on prototype board?

Martin Seeger

Part Number: TMDS181
Other Parts Discussed in Thread: TUSB3410

Dear Team,

our customer would like to use the EyeScan tool with a TMDS181 on his prototype board.

I understand that the EyeScan normally works with the TMDS181 EVM.

> Is there a way to use the tool with the prototype (maybe with the grey USB Interface Adapter?) or with importing register dumps manually?

Looking forward to your feedback.

Best Regards
Martin

over 8 years ago

0 JMMN over 8 years ago

TI__Guru 60870 points

Hi Martin,

The EyeScan utility requires the TUSB3410 on the TMDS181EVM to act as the USB to I2C interface. Does the customer have a TMDS181EVM? They can jumper between the I2C header on the EVM to their prototype and use the EyeScan utility.

Regards,

JMMN

0 Martin Seeger over 8 years ago in reply to JMMN

TI__Expert 5411 points

Thanks a lot for the advice. I ordered an EVM and we will check if we can use the tool this way.
Best Regards
Martin

Interface

Interface forum

TMDS181: EyeScan Tool wit TMDS181 on prototype board?